Trojan horse on wheels SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The wooden horse: a barrel body of planks on four straight legs, a neck with a toothed mane, a blocky head, a tail, a hatch in its side, and a platform on two wheels. One piece, with the plank lines cut as slots.
What is in the file
| Size | 90 × 100 mm (3.55 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 887 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 114 curve and line segments |
Measured from the file. PNG: 1,810 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.9 × 1 in (23 × 25 mm) | 0.81 mm | 225 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.8 × 2 in (46 × 51 mm) | 1.6 mm | 451 mm | 30 | Vinyl, card and thin sheet |
| 2.7 × 3 in (69 × 76 mm) | 2.4 mm | 676 mm | 12 | Vinyl, card and thin sheet |
| 3.6 × 4 in (92 × 102 mm) | 3.3 mm | 901 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.41 × 6 in (137 × 152 mm) | 4.9 mm | 1,352 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.21 × 8 in (183 × 203 mm) | 6.5 mm | 1,802 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.81 × 12 in (275 × 305 mm) | 9.8 mm | 2,704 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trojan SVG files
-
Trojan shield with the wooden horse Solid · one piece -
Trojan sword and spear, crossed Solid · one piece -
Trojan helmet over a crossed sword and spear Solid · one piece -
Trojan mascot badge in a ring Solid · one piece -
Trojan helmet in a laurel wreath Solid · 2 pieces -
Trojan helmet outline Outline · one piece -
Trojan helmet on a red disc, in three colours Layered · 3 pieces -
Trojan helmet with a flowing crest Solid · one piece
← Trojan helmet without a crest All 12 Trojans Trojan shield with the wooden horse →