Too Cute to Pinch with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Too Cute to Pinch” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.78 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 30: 12 outer edges and 18 cut-outs |
| Cut length | 1,864 mm at this size |
| Narrowest part | 4.9 mm at this size |
| Nodes | 534 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,433 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 1.2 mm | 473 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.41 in (51 × 36 mm) | 2.5 mm | 947 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.11 in (76 × 54 mm) | 3.7 mm | 1,420 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.82 in (102 × 72 mm) | 5 mm | 1,894 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.23 in (152 × 107 mm) | 7.5 mm | 2,841 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.64 in (203 × 143 mm) | 10 mm | 3,788 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.46 in (305 × 215 mm) | 15 mm | 5,681 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Too Cute to Pinch SVG files
-
Too Cute to Pinch with a four-leaf clover Solid · 11 pieces
-
Too Cute to Pinch in Pacifico Solid · 7 pieces
-
Too Cute to Pinch in Lobster Solid · 7 pieces
-
Too Cute to Pinch in Kaushan Script Solid · 15 pieces
-
Too Cute to Pinch in Lilita One Solid · 15 pieces
-
Too Cute to Pinch in Alfa Slab One Solid · 15 pieces
-
Too Cute to Pinch in Amatic SC Solid · 14 pieces
-
Too Cute to Pinch in block capitals Solid · 14 pieces
← Too Cute to Pinch stencil plate All 13 Too Cute to Pinch designs Too Cute to Pinch with a four-leaf clover →