Too Cute to Pinch in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Too Cute to Pinch” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 43 mm (3.94 × 1.69 in), scales to any size |
|---|---|
| Pieces | 15 separate pieces |
| Outlines to cut | 20: 15 outer edges and 5 cut-outs |
| Cut length | 893 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 239 curve and line segments |
Measured from the file. PNG: 2,000 × 900 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.43 in (25 × 11 mm) | 0.61 mm | 227 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.86 in (51 × 22 mm) | 1.2 mm | 454 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.28 in (76 × 33 mm) | 1.8 mm | 680 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.71 in (102 × 43 mm) | 2.4 mm | 907 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.57 in (152 × 65 mm) | 3.7 mm | 1,361 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.42 in (203 × 87 mm) | 4.9 mm | 1,815 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.14 in (305 × 130 mm) | 7.3 mm | 2,722 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Too Cute to Pinch SVG files
-
Too Cute to Pinch in Amatic SC Solid · 14 pieces
-
Too Cute to Pinch in block capitals Solid · 14 pieces
-
Too Cute to Pinch in script and capitals Solid · 10 pieces
-
Too Cute to Pinch with hearts Solid · 13 pieces
-
Too Cute to Pinch outline lettering Outline · 19 pieces
-
Too Cute to Pinch stencil plate Solid · one piece
-
Too Cute to Pinch with a drop shadow Layered · 12 pieces
-
Too Cute to Pinch with a four-leaf clover Solid · 11 pieces
← Too Cute to Pinch in Lilita One All 13 Too Cute to Pinch designs Too Cute to Pinch in Amatic SC →