Free Too Cute to Pinch SVG

Too Cute to Pinch in Lilita One SVG

Too Cute to Pinch in Lilita One, as a solid black shape — Too Cute to Pinch in Lilita One. The preview is the SVG file itself.

“Too Cute to Pinch” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 50 mm (3.94 × 1.97 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	20: 15 outer edges and 5 cut-outs
Cut length	864 mm at this size
Narrowest part	3.9 mm at this size
Nodes	255 curve and line segments

Measured from the file. PNG: 2,000 × 1,038 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.99 mm	219 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 1 in (51 × 25 mm)	2 mm	439 mm	50	Vinyl, card and thin sheet
3 × 1.5 in (76 × 38 mm)	3 mm	658 mm	21	Vinyl, card and thin sheet
4 × 2 in (102 × 51 mm)	4 mm	878 mm	10	Any material, including 3 mm wood and acrylic
6 × 3 in (152 × 76 mm)	5.9 mm	1,317 mm	3	Any material, including 3 mm wood and acrylic
8 × 4 in (203 × 102 mm)	7.9 mm	1,756 mm	2	Any material, including 3 mm wood and acrylic
12 × 6 in (305 × 152 mm)	12 mm	2,633 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Too Cute to Pinch SVG files

← Too Cute to Pinch in Kaushan Script All 12 Too Cute to Pinch designs Too Cute to Pinch in Alfa Slab One →