Free Too Cute to Pinch SVG

Too Cute to Pinch in Kaushan Script SVG

Too Cute to Pinch in Kaushan Script, as a solid black shape — Too Cute to Pinch in Kaushan Script. The preview is the SVG file itself.

“Too Cute to Pinch” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.31 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	20: 15 outer edges and 5 cut-outs
Cut length	1,103 mm at this size
Narrowest part	1.4 mm at this size
Nodes	464 curve and line segments

Measured from the file. PNG: 2,000 × 1,208 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.36 mm	280 mm	150	Too fine for most machines
2 × 1.18 in (51 × 30 mm)	0.71 mm	560 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.76 in (76 × 45 mm)	1.1 mm	840 mm	18	Vinyl, card and thin sheet
4 × 2.35 in (102 × 60 mm)	1.4 mm	1,121 mm	8	Vinyl, card and thin sheet
6 × 3.53 in (152 × 90 mm)	2.1 mm	1,681 mm	3	Vinyl, card and thin sheet
8 × 4.7 in (203 × 119 mm)	2.8 mm	2,241 mm	2	Vinyl, card and thin sheet
12 × 7.06 in (305 × 179 mm)	4.3 mm	3,362 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Too Cute to Pinch SVG files

← Too Cute to Pinch in Lobster All 12 Too Cute to Pinch designs Too Cute to Pinch in Lilita One →