Free Too Cute to Pinch SVG

Too Cute to Pinch in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Too Cute to Pinch in Lobster, as a solid black shape
Too Cute to Pinch in Lobster. The preview is the SVG file itself.

“Too Cute to Pinch” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 67 mm (3.94 × 2.64 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length1,132 mm at this size
Narrowest part1.2 mm at this size
Nodes283 curve and line segments

Measured from the file. PNG: 2,000 × 1,365 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.3 mm288 mm140Too fine for most machines
2 × 1.34 in (51 × 34 mm)0.61 mm575 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.01 in (76 × 51 mm)0.91 mm863 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.68 in (102 × 68 mm)1.2 mm1,150 mm8Vinyl, card and thin sheet
6 × 4.02 in (152 × 102 mm)1.8 mm1,725 mm2Vinyl, card and thin sheet
8 × 5.36 in (203 × 136 mm)2.4 mm2,300 mm2Vinyl, card and thin sheet
12 × 8.04 in (305 × 204 mm)3.7 mm3,450 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Too Cute to Pinch SVG files

← Too Cute to Pinch in Pacifico All 13 Too Cute to Pinch designs Too Cute to Pinch in Kaushan Script →