Free Too Cute to Pinch SVG

Too Cute to Pinch in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Too Cute to Pinch in Pacifico, as a solid black shape
Too Cute to Pinch in Pacifico. The preview is the SVG file itself.

“Too Cute to Pinch” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces7 separate pieces
Outlines to cut15: 7 outer edges and 8 cut-outs
Cut length1,095 mm at this size
Narrowest part1.9 mm at this size
Nodes329 curve and line segments

Measured from the file. PNG: 2,000 × 1,417 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.48 mm278 mm130Too fine for most machines
2 × 1.39 in (51 × 35 mm)0.97 mm556 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)1.4 mm834 mm15Vinyl, card and thin sheet
4 × 2.79 in (102 × 71 mm)1.9 mm1,113 mm8Vinyl, card and thin sheet
6 × 4.18 in (152 × 106 mm)2.9 mm1,669 mm2Vinyl, card and thin sheet
8 × 5.58 in (203 × 142 mm)3.9 mm2,225 mm2Any material, including 3 mm wood and acrylic
12 × 8.36 in (305 × 212 mm)5.8 mm3,338 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Too Cute to Pinch SVG files

← Too Cute to Pinch with a four-leaf clover All 13 Too Cute to Pinch designs Too Cute to Pinch in Lobster →