Free teardrop SVG

Three water drops SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three water drops, as a solid black shape
Three water drops. The preview is the SVG file itself.

One large water drop with two small ones beside it, the two larger with a shine mark cut out. Three separate pieces by design, for splashes and condensation.

What is in the file

Size93 × 100 mm (3.67 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length492 mm at this size
Narrowest part3.6 mm at this size
Nodes65 curve and line segments

Measured from the file. PNG: 1,871 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.93 × 1 in (24 × 25 mm)0.91 mm125 mm100Fine detail: vinyl and paper only, weed with care
1.87 × 2 in (47 × 51 mm)1.8 mm250 mm25Vinyl, card and thin sheet
2.8 × 3 in (71 × 76 mm)2.7 mm375 mm12Vinyl, card and thin sheet
3.73 × 4 in (95 × 102 mm)3.7 mm500 mm6Any material, including 3 mm wood and acrylic
5.6 × 6 in (142 × 152 mm)5.5 mm750 mm2Any material, including 3 mm wood and acrylic
7.46 × 8 in (190 × 203 mm)7.3 mm1,000 mm1Any material, including 3 mm wood and acrylic
11.2 × 12 in (284 × 305 mm)11 mm1,500 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More teardrop SVG files

← Teardrop raindrops All 20 teardrops Teardrop falling into ripples →