Free teardrop SVG

Nested teardrops SVG

Nested teardrops, drawn as a line
Nested teardrops. The preview is the SVG file itself.

Three teardrop outlines, each inside the last, that all touch at the lowest point and weld together there. One piece with no ties needed.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size66 × 100 mm (2.6 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length785 mm at this size
Narrowest part4.4 mm at this size
Nodes64 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,346 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)1.1 mm199 mm140Vinyl, card and thin sheet
1.32 × 2 in (34 × 51 mm)2.2 mm399 mm40Vinyl, card and thin sheet
1.98 × 3 in (50 × 76 mm)3.4 mm598 mm15Any material, including 3 mm wood and acrylic
2.64 × 4 in (67 × 102 mm)4.5 mm798 mm8Any material, including 3 mm wood and acrylic
3.96 × 6 in (101 × 152 mm)6.7 mm1,196 mm2Any material, including 3 mm wood and acrylic
5.28 × 8 in (134 × 203 mm)8.9 mm1,595 mm2Any material, including 3 mm wood and acrylic
7.92 × 12 in (201 × 305 mm)13 mm2,393 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More teardrop SVG files

← Teardrop falling into ripples All 20 teardrops Teardrop made of small drops →