Free teardrop SVG

Pair of teardrop earrings SVG

Pair of teardrop earrings, as a solid black shape
Pair of teardrop earrings. The preview is the SVG file itself.

A left and a right earring, mirror images of each other: each has a drop-shaped window that leans to the outside, leaving a band that is slim on one side and broad on the other.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length737 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes80 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,813 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)Over 1.5 mm187 mm110Vinyl, card and thin sheet
2 × 1.81 in (51 × 46 mm)Over 3 mm374 mm30Any material, including 3 mm wood and acrylic
3 × 2.71 in (76 × 69 mm)Over 4.6 mm562 mm12Any material, including 3 mm wood and acrylic
4 × 3.61 in (102 × 92 mm)Over 6.1 mm749 mm6Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)Over 9.1 mm1,123 mm2Any material, including 3 mm wood and acrylic
8 × 7.22 in (203 × 183 mm)Over 12 mm1,498 mm1Any material, including 3 mm wood and acrylic
12 × 10.84 in (305 × 275 mm)Over 18 mm2,246 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More teardrop SVG files

← Layered teardrop earring All 20 teardrops Solid teardrop shape →