Free teardrop SVG

Layered teardrop earring SVG

Layered teardrop earring, in layered colours
Layered teardrop earring. The preview is the SVG file itself.

Three teardrops in three sizes that hang from the same hole, one on top of the next. Cut each layer from a different colour and stack them on one jump ring.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size79 × 100 mm (3.12 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut6: 3 outer edges and 3 cut-outs
Cut length665 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes71 curve and line segments
SymmetryMirror
Layers3: back, middle and front

Measured from the file. PNG: 1,602 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.79 × 1 in (20 × 25 mm)Over 1.5 mm169 mm120Vinyl, card and thin sheet
1.59 × 2 in (40 × 51 mm)Over 3 mm338 mm30Any material, including 3 mm wood and acrylic
2.38 × 3 in (60 × 76 mm)Over 4.6 mm507 mm12Any material, including 3 mm wood and acrylic
3.17 × 4 in (81 × 102 mm)Over 6.1 mm676 mm6Any material, including 3 mm wood and acrylic
4.76 × 6 in (121 × 152 mm)Over 9.1 mm1,013 mm2Any material, including 3 mm wood and acrylic
6.34 × 8 in (161 × 203 mm)Over 12 mm1,351 mm1Any material, including 3 mm wood and acrylic
9.52 × 12 in (242 × 305 mm)Over 18 mm2,027 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More teardrop SVG files

← Teardrop earring with fan cut-outs All 20 teardrops Pair of teardrop earrings →