Free teardrop SVG

Teardrop earring with fan cut-outs SVG

Teardrop earring with fan cut-outs, as a solid black shape
Teardrop earring with fan cut-outs. The preview is the SVG file itself.

A teardrop earring with five windows fanning down from below the hole, like rays or a scallop shell. The bars between them are about 2.5 mm wide at the top and widen towards the rim.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size73 × 100 mm (2.85 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length779 mm at this size
Narrowest part3.4 mm at this size
Nodes96 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,471 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.73 × 1 in (18 × 25 mm)0.86 mm198 mm130Fine detail: vinyl and paper only, weed with care
1.45 × 2 in (37 × 51 mm)1.7 mm396 mm35Vinyl, card and thin sheet
2.17 × 3 in (55 × 76 mm)2.6 mm594 mm15Vinyl, card and thin sheet
2.9 × 4 in (74 × 102 mm)3.5 mm791 mm6Any material, including 3 mm wood and acrylic
4.35 × 6 in (110 × 152 mm)5.2 mm1,187 mm2Any material, including 3 mm wood and acrylic
5.8 × 8 in (147 × 203 mm)6.9 mm1,583 mm2Any material, including 3 mm wood and acrylic
8.7 × 12 in (221 × 305 mm)10 mm2,374 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More teardrop SVG files

← Teardrop leaf earring All 20 teardrops Layered teardrop earring →