Free teardrop SVG

Teardrop cut-out earring SVG

Teardrop cut-out earring, drawn as a line — Teardrop cut-out earring. The preview is the SVG file itself.

A teardrop earring with its middle cut away, leaving an open drop-shaped band about 9 mm wide and a hanging hole at the top. Light to wear, even in wood.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.8 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	480 mm at this size
Narrowest part	3.4 mm at this size
Nodes	39 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,444 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.86 mm	122 mm	130	Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)	1.7 mm	244 mm	35	Vinyl, card and thin sheet
2.13 × 3 in (54 × 76 mm)	2.6 mm	366 mm	15	Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)	3.5 mm	488 mm	8	Any material, including 3 mm wood and acrylic
4.27 × 6 in (108 × 152 mm)	5.2 mm	732 mm	2	Any material, including 3 mm wood and acrylic
5.69 × 8 in (144 × 203 mm)	6.9 mm	975 mm	2	Any material, including 3 mm wood and acrylic
8.53 × 12 in (217 × 305 mm)	10 mm	1,463 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More teardrop SVG files

← Teardrop earring blank All 20 teardrops Teardrop leaf earring →