Superhero shield, left blank SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A plain shield with a flat top and a pointed base, a border line cut just inside its edge and a rivet in each corner. The middle is blank and carries no letter or symbol.
What is in the file
| Size | 86 × 100 mm (3.37 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 840 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 47 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,725 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.86 × 1 in (22 × 25 mm) | 0.61 mm | 213 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.71 × 2 in (44 × 51 mm) | 1.2 mm | 427 mm | 30 | Vinyl, card and thin sheet |
| 2.57 × 3 in (65 × 76 mm) | 1.8 mm | 640 mm | 12 | Vinyl, card and thin sheet |
| 3.43 × 4 in (87 × 102 mm) | 2.4 mm | 853 mm | 6 | Vinyl, card and thin sheet |
| 5.14 × 6 in (131 × 152 mm) | 3.7 mm | 1,280 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.86 × 8 in (174 × 203 mm) | 4.9 mm | 1,707 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.28 × 12 in (261 × 305 mm) | 7.3 mm | 2,560 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More superhero SVG files
-
Superhero monogram burst frame Solid · one piece
-
Toddler superhero mask and cape set Solid · one piece
-
Superhero fist punching through a burst Solid · one piece
-
Superhero name banner Solid · one piece
-
Superhero outline Outline · one piece
-
Layered superhero in four colours Layered · 6 pieces
-
Superhero standing with a cape Solid · one piece
-
Flying superhero with a cape Solid · one piece
← Superhero comic burst, left blank All 15 superheroes Superhero monogram burst frame →