Free superhero SVG

Layered superhero in four colours SVG

Layered superhero in four colours, in layered colours
Layered superhero in four colours. The preview is the SVG file itself.

Four layers to stack, facing the other way: an orange cape with the whole figure as the backing, a teal suit, navy boots and gloves, and a head and hands in a warm skin colour. No emblem on the chest.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size77 × 100 mm (3.03 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut9: 6 outer edges and 3 cut-outs
Cut length1,115 mm at this size
Narrowest part5.6 mm at this size
Nodes385 curve and line segments
Layers4: cape, suit, boots and gloves and skin

Measured from the file. PNG: 1,558 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)1.4 mm283 mm120Vinyl, card and thin sheet
1.54 × 2 in (39 × 51 mm)2.8 mm566 mm35Vinyl, card and thin sheet
2.31 × 3 in (59 × 76 mm)4.3 mm850 mm12Any material, including 3 mm wood and acrylic
3.08 × 4 in (78 × 102 mm)5.7 mm1,133 mm6Any material, including 3 mm wood and acrylic
4.62 × 6 in (117 × 152 mm)8.5 mm1,699 mm2Any material, including 3 mm wood and acrylic
6.16 × 8 in (156 × 203 mm)11 mm2,266 mm1Any material, including 3 mm wood and acrylic
9.24 × 12 in (235 × 305 mm)17 mm3,399 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More superhero SVG files

← Superhero outline All 15 superheroes Superhero standing with a cape →