Free superhero SVG

Superhero mask with ribbon ties SVG

Superhero mask with ribbon ties, as a solid black shape
Superhero mask with ribbon ties. The preview is the SVG file itself.

A plain eye mask with a point at each outer corner, two almond eye holes and a pair of ribbon ties each side. Exactly mirrored, with no markings, so it suits any costume.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 21 mm (3.94 × 0.84 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length387 mm at this size
Narrowest part6 mm at this size
Nodes80 curve and line segments
SymmetryMirror
Also found asSuper hero mask SVG

Measured from the file. PNG: 2,000 × 487 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.21 in (25 × 5 mm)1.5 mm98 mm290Vinyl, card and thin sheet
2 × 0.43 in (51 × 11 mm)3 mm197 mm95Any material, including 3 mm wood and acrylic
3 × 0.64 in (76 × 16 mm)4.6 mm295 mm42Any material, including 3 mm wood and acrylic
4 × 0.85 in (102 × 22 mm)6.1 mm393 mm22Any material, including 3 mm wood and acrylic
6 × 1.28 in (152 × 32 mm)9.1 mm590 mm8Any material, including 3 mm wood and acrylic
8 × 1.7 in (203 × 43 mm)12 mm786 mm6Any material, including 3 mm wood and acrylic
12 × 2.56 in (305 × 65 mm)18 mm1,180 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More superhero SVG files

← Superhero cape All 15 superheroes Little superhero boy with a cape →