Free superhero SVG

Superhero fist punching through a burst SVG

Superhero fist punching through a burst, as a solid black shape — Superhero fist punching through a burst. The preview is the SVG file itself.

A clenched fist seen knuckles on, with a cuff at the wrist, in front of a twelve-pointed comic burst. The punch that ends the fight, with no word needed.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 88 mm (3.94 × 3.44 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	830 mm at this size
Narrowest part	2.1 mm at this size
Nodes	171 curve and line segments

Measured from the file. PNG: 2,000 × 1,760 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.88 in (25 × 22 mm)	0.53 mm	211 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.75 in (51 × 44 mm)	1.1 mm	422 mm	30	Vinyl, card and thin sheet
3 × 2.63 in (76 × 67 mm)	1.6 mm	632 mm	12	Vinyl, card and thin sheet
4 × 3.5 in (102 × 89 mm)	2.1 mm	843 mm	6	Vinyl, card and thin sheet
6 × 5.25 in (152 × 133 mm)	3.2 mm	1,265 mm	2	Any material, including 3 mm wood and acrylic
8 × 7 in (203 × 178 mm)	4.3 mm	1,687 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.5 in (305 × 267 mm)	6.4 mm	2,530 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More superhero SVG files

← Toddler superhero mask and cape set All 15 superheroes Superhero name banner →