Free superhero SVG

Superhero name banner SVG

Superhero name banner, as a solid black shape
Superhero name banner. The preview is the SVG file itself.

A blank ribbon banner with folded ends, a mask sitting on its top edge and a small burst each side. The ribbon takes a child’s name for a party sign or a bedroom door.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 45 mm (3.94 × 1.78 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length584 mm at this size
Narrowest part2.2 mm at this size
Nodes110 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 946 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.56 mm148 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.9 in (51 × 23 mm)1.1 mm297 mm55Vinyl, card and thin sheet
3 × 1.36 in (76 × 34 mm)1.7 mm445 mm21Vinyl, card and thin sheet
4 × 1.81 in (102 × 46 mm)2.2 mm593 mm12Vinyl, card and thin sheet
6 × 2.71 in (152 × 69 mm)3.4 mm890 mm4Any material, including 3 mm wood and acrylic
8 × 3.62 in (203 × 92 mm)4.5 mm1,187 mm3Any material, including 3 mm wood and acrylic
12 × 5.42 in (305 × 138 mm)6.7 mm1,780 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More superhero SVG files

← Superhero fist punching through a burst All 15 superheroes Superhero outline →