Free superhero SVG

Flying superhero with a cape SVG

Flying superhero with a cape, as a solid black shape — Flying superhero with a cape. The preview is the SVG file itself.

A hero in flight, seen side on: both fists stretched out in front, legs trailing and the cape streaming back along the body, parted from it by a slim seam. Wide and low, for the top of a poster or a bedroom wall.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.32 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	383 mm at this size
Narrowest part	2.8 mm at this size
Nodes	119 curve and line segments

Measured from the file. PNG: 2,000 × 721 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	0.71 mm	97 mm	220	Fine detail: vinyl and paper only, weed with care
2 × 0.67 in (51 × 17 mm)	1.4 mm	195 mm	70	Vinyl, card and thin sheet
3 × 1 in (76 × 26 mm)	2.1 mm	292 mm	30	Vinyl, card and thin sheet
4 × 1.34 in (102 × 34 mm)	2.8 mm	389 mm	14	Vinyl, card and thin sheet
6 × 2.01 in (152 × 51 mm)	4.3 mm	584 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.68 in (203 × 68 mm)	5.7 mm	778 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.02 in (305 × 102 mm)	8.5 mm	1,167 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More superhero SVG files

← Superhero standing with a cape All 15 superheroes Superhero cape →