Free starfish SVG

Cute starfish with a face SVG

Cute starfish with a face, as a solid black shape
Cute starfish with a face. The preview is the SVG file itself.

A plump, short-armed starfish with two round eyes, rosy cheeks and a wide smile. A friendly one for beach party invitations, swim bags and children’s rooms.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 96 mm (3.94 × 3.77 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length480 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes132 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,919 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)Over 1.5 mm122 mm100Vinyl, card and thin sheet
2 × 1.92 in (51 × 49 mm)Over 3 mm244 mm25Any material, including 3 mm wood and acrylic
3 × 2.87 in (76 × 73 mm)Over 4.6 mm366 mm9Any material, including 3 mm wood and acrylic
4 × 3.83 in (102 × 97 mm)Over 6.1 mm488 mm6Any material, including 3 mm wood and acrylic
6 × 5.75 in (152 × 146 mm)Over 9.1 mm732 mm2Any material, including 3 mm wood and acrylic
8 × 7.66 in (203 × 195 mm)Over 12 mm975 mm1Any material, including 3 mm wood and acrylic
12 × 11.5 in (305 × 292 mm)Over 18 mm1,463 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More starfish SVG files

← Starfish outline All 13 starfish Knobbly starfish →