Free starfish SVG

Starfish with ridged arms SVG

Starfish with ridged arms, as a solid black shape
Starfish with ridged arms. The preview is the SVG file itself.

A slim starfish with a line cut down the middle of each arm and a small star at the centre, which gives it a folded, three-dimensional look. Score the lines instead of cutting to fold it for real.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 95 mm (3.94 × 3.75 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length806 mm at this size
Narrowest part3.2 mm at this size
Nodes205 curve and line segments
Symmetry5-fold rotation

Measured from the file. PNG: 2,000 × 1,910 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.81 mm205 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.91 in (51 × 48 mm)1.6 mm409 mm25Vinyl, card and thin sheet
3 × 2.86 in (76 × 73 mm)2.4 mm614 mm9Vinyl, card and thin sheet
4 × 3.81 in (102 × 97 mm)3.3 mm819 mm6Any material, including 3 mm wood and acrylic
6 × 5.72 in (152 × 145 mm)4.9 mm1,228 mm2Any material, including 3 mm wood and acrylic
8 × 7.62 in (203 × 194 mm)6.5 mm1,638 mm1Any material, including 3 mm wood and acrylic
12 × 11.44 in (305 × 290 mm)9.8 mm2,457 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More starfish SVG files

← Brittle starfish with wavy arms All 13 starfish Geometric starfish →