Free starfish SVG

Mandala starfish SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mandala starfish, as a solid black shape
Mandala starfish. The preview is the SVG file itself.

A broad starfish cut like a mandala: a flower at the centre, then a chain of shrinking petals and dots down every arm. It has five-fold symmetry. Cut it at full size.

What is in the file

Size100 × 96 mm (3.94 × 3.76 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut42: 1 outer edge and 41 cut-outs
Cut length1,130 mm at this size
Narrowest part1 mm at this size
Nodes573 curve and line segments
Symmetry5-fold rotation

Measured from the file. PNG: 2,000 × 1,913 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.25 mm287 mm100Too fine for most machines
2 × 1.91 in (51 × 49 mm)0.51 mm574 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.87 in (76 × 73 mm)0.76 mm861 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.82 in (102 × 97 mm)1 mm1,148 mm6Vinyl, card and thin sheet
6 × 5.73 in (152 × 146 mm)1.5 mm1,722 mm2Vinyl, card and thin sheet
8 × 7.64 in (203 × 194 mm)2 mm2,296 mm1Vinyl, card and thin sheet
12 × 11.46 in (305 × 291 mm)3 mm3,444 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More starfish SVG files

← Geometric starfish All 13 starfish Starfish with a monogram window →