Free starfish SVG

Starfish and sand dollar SVG

Starfish and sand dollar, as a solid black shape — Starfish and sand dollar. The preview is the SVG file itself.

A starfish resting against a sand dollar, which has its five-petalled flower and five small slots cut out. Two beach finds welded into one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 93 mm (3.94 × 3.66 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	37: 1 outer edge and 36 cut-outs
Cut length	835 mm at this size
Narrowest part	2.7 mm at this size
Nodes	257 curve and line segments

Measured from the file. PNG: 2,000 × 1,863 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.93 in (25 × 24 mm)	0.69 mm	212 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.86 in (51 × 47 mm)	1.4 mm	424 mm	25	Vinyl, card and thin sheet
3 × 2.79 in (76 × 71 mm)	2.1 mm	636 mm	12	Vinyl, card and thin sheet
4 × 3.72 in (102 × 94 mm)	2.7 mm	848 mm	6	Vinyl, card and thin sheet
6 × 5.57 in (152 × 142 mm)	4.1 mm	1,273 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.43 in (203 × 189 mm)	5.5 mm	1,697 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.15 in (305 × 283 mm)	8.2 mm	2,545 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More starfish SVG files

← Starfish wreath All 13 starfish Three starfish →