Free starfish SVG

Geometric starfish SVG

Geometric starfish, as a solid black shape — Geometric starfish. The preview is the SVG file itself.

A straight-sided star cut into ten facets by lines from the centre to each point and each notch. All straight lines, for a modern beach house look, foil and engraving.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.75 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	894 mm at this size
Narrowest part	3 mm at this size
Nodes	165 curve and line segments
Symmetry	5-fold rotation

Measured from the file. PNG: 2,000 × 1,908 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.76 mm	227 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1.5 mm	454 mm	25	Vinyl, card and thin sheet
3 × 2.86 in (76 × 73 mm)	2.3 mm	681 mm	9	Vinyl, card and thin sheet
4 × 3.81 in (102 × 97 mm)	3 mm	908 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.71 in (152 × 145 mm)	4.6 mm	1,362 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.62 in (203 × 193 mm)	6.1 mm	1,817 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.42 in (305 × 290 mm)	9.1 mm	2,725 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More starfish SVG files

← Starfish with ridged arms All 13 starfish Mandala starfish →