Free star SVG

Retro starburst SVG

Retro starburst. The preview is the SVG file itself.

A mid-century starburst: four long needles, four medium and eight short, all meeting at a small centre. The needles end in fine tips, so cut it large, and in vinyl or card rather than wood.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	695 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	32 curve and line segments
Symmetry	4-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	Over 1.5 mm	177 mm	100	Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)	Over 3 mm	353 mm	25	Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)	Over 4.6 mm	530 mm	9	Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)	Over 6.1 mm	706 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	Over 9.1 mm	1,059 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	Over 12 mm	1,412 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	Over 18 mm	2,118 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More star SVG files

← Christmas star All 27 stars Starburst badge →