Scattered stars SVG
Six stars from large to small, each tilted a different way. They are separate pieces: cut the whole scatter at once or pick single stars from it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 91 × 100 mm (3.58 × 3.94 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 6 outlines |
| Cut length | 599 mm at this size |
| Narrowest part | 4.6 mm at this size |
| Nodes | 60 curve and line segments |
Measured from the file. PNG: 1,825 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.91 × 1 in (23 × 25 mm) | 1.2 mm | 152 mm | 110 | Vinyl, card and thin sheet |
| 1.82 × 2 in (46 × 51 mm) | 2.3 mm | 304 mm | 30 | Vinyl, card and thin sheet |
| 2.73 × 3 in (69 × 76 mm) | 3.5 mm | 456 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.64 × 4 in (92 × 102 mm) | 4.7 mm | 609 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.45 × 6 in (139 × 152 mm) | 7 mm | 913 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.27 × 8 in (185 × 203 mm) | 9.3 mm | 1,217 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.91 × 12 in (277 × 305 mm) | 14 mm | 1,826 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Star cluster 
Star pattern panel 
Wreath of stars 
Star border 
Five-pointed star 
Rounded star 
Primitive star 
Star outline 