Star pattern panel SVG
A square panel with 23 small stars cut out in staggered rows. Use the panel as a stencil, or keep the stars that drop out as confetti.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 24: 1 outer edge and 23 cut-outs |
| Cut length | 1,660 mm at this size |
| Narrowest part | 4.4 mm at this size |
| Nodes | 246 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 1.1 mm | 422 mm | 100 | Vinyl, card and thin sheet |
| 2 × 2 in (51 × 51 mm) | 2.2 mm | 843 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 3.4 mm | 1,265 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 4 in (102 × 102 mm) | 4.5 mm | 1,687 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 6.7 mm | 2,530 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 8.9 mm | 3,373 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 13 mm | 5,060 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Wreath of stars 
Star border 
Five-pointed star 
Rounded star 
Primitive star 
Star outline 
Rounded star outline 
One-line star 