Wreath of stars SVG
Eleven stars set point-outwards on a thin hoop and welded into one ring. The centre is open for a monogram, a number or a short word.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 99 mm (3.94 × 3.9 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 1,034 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 138 curve and line segments |
| Symmetry | 11-fold rotation and mirror |
Measured from the file. PNG: 2,000 × 1,981 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.99 in (25 × 25 mm) | 0.71 mm | 263 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.98 in (51 × 50 mm) | 1.4 mm | 525 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.97 in (76 × 75 mm) | 2.1 mm | 788 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.96 in (102 × 101 mm) | 2.8 mm | 1,051 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.94 in (152 × 151 mm) | 4.3 mm | 1,576 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 7.92 in (203 × 201 mm) | 5.7 mm | 2,101 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.88 in (305 × 302 mm) | 8.5 mm | 3,152 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Star border 
Five-pointed star 
Rounded star 
Primitive star 
Star outline 
Rounded star outline 
One-line star 
Star within a star 