Free star SVG

Star within a star SVG

Star within a star. The preview is the SVG file itself.

A bold star outline with a smaller solid star inside, held by a short tie across each valley. The five windows between them are chevron-shaped.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	860 mm at this size
Narrowest part	3.6 mm at this size
Nodes	40 curve and line segments
Symmetry	5-fold rotation and mirror

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.91 mm	218 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1.8 mm	437 mm	25	Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)	2.7 mm	655 mm	9	Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)	3.7 mm	874 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.71 in (152 × 145 mm)	5.5 mm	1,311 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)	7.3 mm	1,748 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)	11 mm	2,621 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More star SVG files

← One-line star All 27 stars Nautical star →