Flag star with stripes SVG
A star outline filled like a flag: a solid corner with three small stars cut out, and horizontal stripes across the rest. For the Fourth of July, Memorial Day and veterans’ projects.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 927 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 99 curve and line segments |
Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.71 mm | 235 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.9 in (51 × 48 mm) | 1.4 mm | 471 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.85 in (76 × 72 mm) | 2.1 mm | 706 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.8 in (102 × 97 mm) | 2.8 mm | 942 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.71 in (152 × 145 mm) | 4.3 mm | 1,413 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.61 in (203 × 193 mm) | 5.7 mm | 1,884 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.41 in (305 × 290 mm) | 8.5 mm | 2,825 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Six-pointed star 
Eight-pointed star 
Four-pointed sparkle 
Three sparkles 
North star 
Compass star 
Christmas star 
Retro starburst 