Free star SVG

Faceted barn star SVG

Faceted barn star. The preview is the SVG file itself.

A solid star scored with ten slots, one down each point and one in each valley, to suggest the folded facets of a metal barn star. The slots stop short, so it stays one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	872 mm at this size
Narrowest part	2.1 mm at this size
Nodes	50 curve and line segments
Symmetry	5-fold rotation and mirror

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.53 mm	221 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1.1 mm	443 mm	25	Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)	1.6 mm	664 mm	9	Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)	2.1 mm	886 mm	6	Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)	3.2 mm	1,329 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)	4.3 mm	1,772 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)	6.4 mm	2,658 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More star SVG files

← Star in a circle All 27 stars Flag star with stripes →