Star in a circle SVG
A five-pointed star whose tips are welded into a ring, the way a lone star sits on a badge or a barn. The ring makes it rigid enough to hang as a sign.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 870 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 33 curve and line segments |
| Symmetry | 5-fold rotation and mirror |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.64 mm | 221 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.3 mm | 442 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 1.9 mm | 663 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 2.5 mm | 884 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 3.8 mm | 1,326 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 5.1 mm | 1,768 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 7.6 mm | 2,652 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Faceted barn star 
Flag star with stripes 
Six-pointed star 
Eight-pointed star 
Four-pointed sparkle 
Three sparkles 
North star 
Compass star 