Free star SVG

Nautical star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Nautical star, as a solid black shape
Nautical star. The preview is the SVG file itself.

The sailor’s star: each point is split down its length, one half solid and one half open, so the star seems to stand up in relief. A small hub ties the centre together.

What is in the file

Size100 × 95 mm (3.94 × 3.74 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length798 mm at this size
Narrowest part2.1 mm at this size
Nodes30 curve and line segments
Symmetry5-fold rotation

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.53 mm203 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)1.1 mm405 mm25Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)1.6 mm608 mm9Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)2.1 mm811 mm6Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)3.2 mm1,216 mm2Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)4.3 mm1,622 mm1Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)6.4 mm2,432 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More star SVG files

← Star within a star All 27 stars Star in a circle →