Free star SVG

Shooting star SVG

Shooting star. The preview is the SVG file itself.

A tilted star trailing three curved streaks that taper to nothing. One welded piece. The streaks end in fine tips, so give it room when you cut it small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 78 mm (3.94 × 3.09 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	561 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	64 curve and line segments

Measured from the file. PNG: 2,000 × 1,585 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.78 in (25 × 20 mm)	Over 1.5 mm	142 mm	120	Vinyl, card and thin sheet
2 × 1.57 in (51 × 40 mm)	Over 3 mm	285 mm	30	Any material, including 3 mm wood and acrylic
3 × 2.35 in (76 × 60 mm)	Over 4.6 mm	427 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.14 in (102 × 80 mm)	Over 6.1 mm	570 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.7 in (152 × 119 mm)	Over 9.1 mm	855 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.27 in (203 × 159 mm)	Over 12 mm	1,140 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.41 in (305 × 239 mm)	Over 18 mm	1,710 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More star SVG files

← Starburst badge All 27 stars Moon and stars →