Free spiral SVG

Triangular spiral SVG

Triangular spiral, drawn as a line — Triangular spiral. The preview is the SVG file itself.

A spiral of three straight sides per turn, turning 120 degrees at every corner and growing as it goes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 91 mm (3.94 × 3.58 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,701 mm at this size
Narrowest part	2.9 mm at this size
Nodes	32 curve and line segments

Measured from the file. PNG: 2,000 × 1,827 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.91 in (25 × 23 mm)	0.74 mm	432 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.82 in (51 × 46 mm)	1.5 mm	864 mm	30	Vinyl, card and thin sheet
3 × 2.73 in (76 × 69 mm)	2.2 mm	1,296 mm	12	Vinyl, card and thin sheet
4 × 3.64 in (102 × 92 mm)	2.9 mm	1,728 mm	6	Vinyl, card and thin sheet
6 × 5.46 in (152 × 139 mm)	4.4 mm	2,592 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.28 in (203 × 185 mm)	5.9 mm	3,456 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.92 in (305 × 277 mm)	8.8 mm	5,185 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Square spiral All 18 spirals Hexagonal spiral →