Free spiral SVG

Spiral cut into a disc SVG

Spiral cut into a disc, as a solid black shape — Spiral cut into a disc. The preview is the SVG file itself.

A solid disc with a spiral slot cut through it, leaving one long coiled strip. Cut from card and pull the centre down for a hanging spiral mobile.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	1,726 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	470 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	Over 1.5 mm	438 mm	100	Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)	Over 3 mm	877 mm	25	Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)	Over 4.6 mm	1,315 mm	9	Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)	Over 6.1 mm	1,754 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	Over 9.1 mm	2,630 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	Over 12 mm	3,507 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	Over 18 mm	5,261 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Triskelion All 18 spirals Archimedean spiral →