Free spiral SVG

Double spiral SVG

Double spiral, drawn as a line — Double spiral. The preview is the SVG file itself.

Two spirals wound into each other from opposite sides, so the line count doubles and the centre shows a small S.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	93 × 100 mm (3.67 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	2,157 mm at this size
Narrowest part	2.5 mm at this size
Nodes	658 curve and line segments
Symmetry	2-fold rotation

Measured from the file. PNG: 1,869 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.93 × 1 in (24 × 25 mm)	0.64 mm	548 mm	100	Fine detail: vinyl and paper only, weed with care
1.86 × 2 in (47 × 51 mm)	1.3 mm	1,096 mm	25	Vinyl, card and thin sheet
2.8 × 3 in (71 × 76 mm)	1.9 mm	1,644 mm	12	Vinyl, card and thin sheet
3.73 × 4 in (95 × 102 mm)	2.5 mm	2,192 mm	6	Vinyl, card and thin sheet
5.59 × 6 in (142 × 152 mm)	3.8 mm	3,287 mm	2	Any material, including 3 mm wood and acrylic
7.46 × 8 in (189 × 203 mm)	5.1 mm	4,383 mm	1	Any material, including 3 mm wood and acrylic
11.18 × 12 in (284 × 305 mm)	7.6 mm	6,575 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Bold spiral with three turns All 18 spirals Triple spiral pinwheel →