Free spiral SVG

Bold spiral with three turns SVG

Bold spiral with three turns, as a solid black shape — Bold spiral with three turns. The preview is the SVG file itself.

Three thick turns with a round blob at the centre. Simple enough to cut at an inch across.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.63 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,038 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	310 curve and line segments

Measured from the file. PNG: 1,850 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	Over 1.5 mm	264 mm	100	Vinyl, card and thin sheet
1.84 × 2 in (47 × 51 mm)	Over 3 mm	527 mm	25	Any material, including 3 mm wood and acrylic
2.77 × 3 in (70 × 76 mm)	Over 4.6 mm	791 mm	12	Any material, including 3 mm wood and acrylic
3.69 × 4 in (94 × 102 mm)	Over 6.1 mm	1,055 mm	6	Any material, including 3 mm wood and acrylic
5.53 × 6 in (141 × 152 mm)	Over 9.1 mm	1,582 mm	2	Any material, including 3 mm wood and acrylic
7.38 × 8 in (187 × 203 mm)	Over 12 mm	2,109 mm	1	Any material, including 3 mm wood and acrylic
11.06 × 12 in (281 × 305 mm)	Over 18 mm	3,164 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Tight spiral with ten turns All 18 spirals Double spiral →