Free spiral SVG

Tight spiral with ten turns SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tight spiral with ten turns, drawn as a line
Tight spiral with ten turns. The preview is the SVG file itself.

Ten close turns of an even line: a vinyl-record or coil look. The gap between turns is the same as the line is wide.

What is in the file

Size98 × 100 mm (3.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length3,152 mm at this size
Narrowest part2.5 mm at this size
Nodes1,041 curve and line segments

Measured from the file. PNG: 1,952 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.64 mm801 mm100Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (50 × 51 mm)1.3 mm1,601 mm25Vinyl, card and thin sheet
2.93 × 3 in (74 × 76 mm)1.9 mm2,402 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)2.5 mm3,202 mm4Vinyl, card and thin sheet
5.85 × 6 in (149 × 152 mm)3.8 mm4,804 mm2Any material, including 3 mm wood and acrylic
7.8 × 8 in (198 × 203 mm)5.1 mm6,405 mm1Any material, including 3 mm wood and acrylic
11.7 × 12 in (297 × 305 mm)7.6 mm9,607 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Archimedean spiral All 18 spirals Bold spiral with three turns →