Free spiral SVG

Fibonacci spiral with squares SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fibonacci spiral with squares, drawn as a line
Fibonacci spiral with squares. The preview is the SVG file itself.

The Fibonacci spiral drawn over its eight squares, which tile a 34 by 21 rectangle. The classroom diagram, as a clean line drawing.

What is in the file

Size100 × 63 mm (3.94 × 2.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,187 mm at this size
Narrowest part1 mm at this size
Nodes160 curve and line segments

Measured from the file. PNG: 2,000 × 1,279 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.25 mm301 mm140Too fine for most machines
2 × 1.25 in (51 × 32 mm)0.51 mm603 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 48 mm)0.76 mm904 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.5 in (102 × 64 mm)1 mm1,206 mm8Vinyl, card and thin sheet
6 × 3.75 in (152 × 95 mm)1.5 mm1,809 mm3Vinyl, card and thin sheet
8 × 5 in (203 × 127 mm)2 mm2,412 mm2Vinyl, card and thin sheet
12 × 7.5 in (305 × 190 mm)3 mm3,618 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Fibonacci spiral All 18 spirals Golden spiral →