Free spiral SVG

Logarithmic spiral SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Logarithmic spiral, as a solid black shape
Logarithmic spiral. The preview is the SVG file itself.

A gentler logarithmic spiral, growing by a fifth every quarter turn, with a line that is thin at the centre and thick at the rim: the shape of a nautilus shell.

What is in the file

Size84 × 100 mm (3.3 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length949 mm at this size
Narrowest part1.5 mm at this size
Nodes116 curve and line segments

Measured from the file. PNG: 1,688 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.38 mm241 mm110Too fine for most machines
1.68 × 2 in (43 × 51 mm)0.76 mm482 mm30Fine detail: vinyl and paper only, weed with care
2.51 × 3 in (64 × 76 mm)1.1 mm723 mm12Vinyl, card and thin sheet
3.35 × 4 in (85 × 102 mm)1.5 mm964 mm6Vinyl, card and thin sheet
5.03 × 6 in (128 × 152 mm)2.3 mm1,446 mm2Vinyl, card and thin sheet
6.7 × 8 in (170 × 203 mm)3 mm1,928 mm1Any material, including 3 mm wood and acrylic
10.06 × 12 in (255 × 305 mm)4.6 mm2,893 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Golden spiral All 18 spirals Square spiral →