Free spiral SVG

Spiral of dots SVG

Spiral of dots, as a solid black shape — Spiral of dots. The preview is the SVG file itself.

Dots along an Archimedean spiral, growing from pin-points at the centre to peas at the rim. Loose pieces: made for printing, engraving and plotting, not for cutting out.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	95 × 100 mm (3.74 × 3.94 in), scales to any size
Pieces	121 separate pieces
Outlines to cut	121 outlines
Cut length	1,841 mm at this size
Narrowest part	2.3 mm at this size
Nodes	462 curve and line segments

Measured from the file. PNG: 1,904 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.95 × 1 in (24 × 25 mm)	0.58 mm	468 mm	100	Fine detail: vinyl and paper only, weed with care
1.9 × 2 in (48 × 51 mm)	1.2 mm	935 mm	25	Vinyl, card and thin sheet
2.85 × 3 in (72 × 76 mm)	1.8 mm	1,403 mm	12	Vinyl, card and thin sheet
3.8 × 4 in (97 × 102 mm)	2.3 mm	1,870 mm	6	Vinyl, card and thin sheet
5.7 × 6 in (145 × 152 mm)	3.5 mm	2,806 mm	2	Any material, including 3 mm wood and acrylic
7.6 × 8 in (193 × 203 mm)	4.7 mm	3,741 mm	1	Any material, including 3 mm wood and acrylic
11.4 × 12 in (290 × 305 mm)	7 mm	5,611 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Hexagonal spiral All 18 spirals Spiral sun →