Free spiral SVG

Archimedean spiral SVG

Archimedean spiral, drawn as a line — Archimedean spiral. The preview is the SVG file itself.

The plain spiral: a line that winds outwards five times with the same gap between every turn, like a coiled rope. Round ends, even width.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	95 × 100 mm (3.74 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,611 mm at this size
Narrowest part	3.4 mm at this size
Nodes	524 curve and line segments

Measured from the file. PNG: 1,904 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.95 × 1 in (24 × 25 mm)	0.86 mm	409 mm	100	Fine detail: vinyl and paper only, weed with care
1.9 × 2 in (48 × 51 mm)	1.7 mm	818 mm	25	Vinyl, card and thin sheet
2.85 × 3 in (72 × 76 mm)	2.6 mm	1,228 mm	12	Vinyl, card and thin sheet
3.8 × 4 in (97 × 102 mm)	3.5 mm	1,637 mm	6	Any material, including 3 mm wood and acrylic
5.7 × 6 in (145 × 152 mm)	5.2 mm	2,455 mm	2	Any material, including 3 mm wood and acrylic
7.6 × 8 in (193 × 203 mm)	6.9 mm	3,274 mm	1	Any material, including 3 mm wood and acrylic
11.4 × 12 in (290 × 305 mm)	10 mm	4,910 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More spiral SVG files

← Spiral cut into a disc All 18 spirals Tight spiral with ten turns →