Skateboard from the side SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A board in profile: a deck with both ends kicked up, two trucks bolted under it and two wheels, each a tyre round a core. The ring between tyre and core is cut in two halves, so nothing drops out.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.42 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 426 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 116 curve and line segments |
| Symmetry | Mirror |
| Also found as | Skate board SVG |
Measured from the file. PNG: 2,000 × 769 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | 0.58 mm | 108 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.72 in (51 × 18 mm) | 1.2 mm | 216 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.08 in (76 × 27 mm) | 1.8 mm | 325 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.44 in (102 × 37 mm) | 2.3 mm | 433 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.16 in (152 × 55 mm) | 3.5 mm | 649 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.88 in (203 × 73 mm) | 4.7 mm | 866 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.32 in (305 × 110 mm) | 7 mm | 1,298 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skateboard SVG files
-
Skateboarding ollie Solid · one piece -
Skateboard silhouette of a skater pushing Solid · one piece -
Skater girl on a skateboard Solid · one piece -
Girl with a skateboard Solid · one piece -
Skateboard boy in a helmet Solid · one piece -
Skateboard ramp with a skater Solid · one piece -
Skateboard grind on a rail Solid · one piece -
Skateboard deck from underneath Solid · one piece
← Layered skateboard in four colours All 13 skateboards Skateboarding ollie →