Skateboard silhouette of a skater pushing SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A skater pushing off, facing right: the front foot on the board, the back leg stretched behind with its toe on the ground. One solid piece on a level strip of pavement, made for shadow boxes.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 81 × 100 mm (3.19 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 673 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 198 curve and line segments |
Measured from the file. PNG: 1,633 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.81 × 1 in (21 × 25 mm) | 0.79 mm | 171 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.62 × 2 in (41 × 51 mm) | 1.6 mm | 342 mm | 30 | Vinyl, card and thin sheet |
| 2.43 × 3 in (62 × 76 mm) | 2.4 mm | 513 mm | 12 | Vinyl, card and thin sheet |
| 3.24 × 4 in (82 × 102 mm) | 3.1 mm | 684 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.85 × 6 in (123 × 152 mm) | 4.7 mm | 1,026 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.47 × 8 in (164 × 203 mm) | 6.3 mm | 1,368 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.71 × 12 in (247 × 305 mm) | 9.4 mm | 2,051 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skateboard SVG files
-
Skater girl on a skateboard Solid · one piece -
Girl with a skateboard Solid · one piece -
Skateboard boy in a helmet Solid · one piece -
Skateboard ramp with a skater Solid · one piece -
Skateboard grind on a rail Solid · one piece -
Skateboard deck from underneath Solid · one piece -
Pintail longboard skateboard deck Solid · one piece -
Skateboard helmet Solid · one piece
← Skateboarding ollie All 13 skateboards Skater girl on a skateboard →