Skateboard ramp with a skater SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A quarter pipe with its deck and coping, and a skater riding up the curve, leaning into the wall with the wheels on the ramp. The ramp stands on a flat base and carries a cut line under the deck and another along the foot.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 666 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 168 curve and line segments |
Measured from the file. PNG: 2,000 × 1,413 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.53 mm | 169 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.39 in (51 × 35 mm) | 1.1 mm | 338 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.09 in (76 × 53 mm) | 1.6 mm | 507 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.78 in (102 × 71 mm) | 2.1 mm | 677 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.17 in (152 × 106 mm) | 3.2 mm | 1,015 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.56 in (203 × 141 mm) | 4.3 mm | 1,353 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.34 in (305 × 212 mm) | 6.4 mm | 2,030 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skateboard SVG files
-
Skateboard grind on a rail Solid · one piece -
Skateboard deck from underneath Solid · one piece -
Pintail longboard skateboard deck Solid · one piece -
Skateboard helmet Solid · one piece -
Skateboard wheel with a bearing Solid · one piece -
Layered skateboard in four colours Layered · 6 pieces -
Skateboard from the side Solid · one piece -
Skateboarding ollie Solid · one piece
← Skateboard boy in a helmet All 13 skateboards Skateboard grind on a rail →