Skateboard deck from underneath SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The underside of a board, nose up: both trucks with four bolts each, a kingpin and an axle, and all four wheels showing past the rails. The middle of the deck is clear for a name or a graphic of your own. Exactly mirrored.
What is in the file
| Size | 42 × 100 mm (1.65 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 539 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 84 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 885 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.42 × 1 in (11 × 25 mm) | 0.86 mm | 137 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 0.84 × 2 in (21 × 51 mm) | 1.7 mm | 274 mm | 55 | Vinyl, card and thin sheet |
| 1.26 × 3 in (32 × 76 mm) | 2.6 mm | 411 mm | 24 | Vinyl, card and thin sheet |
| 1.68 × 4 in (43 × 102 mm) | 3.5 mm | 548 mm | 12 | Any material, including 3 mm wood and acrylic |
| 2.52 × 6 in (64 × 152 mm) | 5.2 mm | 821 mm | 4 | Any material, including 3 mm wood and acrylic |
| 3.36 × 8 in (85 × 203 mm) | 6.9 mm | 1,095 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.04 × 12 in (128 × 305 mm) | 10 mm | 1,643 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skateboard SVG files
-
Pintail longboard skateboard deck Solid · one piece -
Skateboard helmet Solid · one piece -
Skateboard wheel with a bearing Solid · one piece -
Layered skateboard in four colours Layered · 6 pieces -
Skateboard from the side Solid · one piece -
Skateboarding ollie Solid · one piece -
Skateboard silhouette of a skater pushing Solid · one piece -
Skater girl on a skateboard Solid · one piece
← Skateboard grind on a rail All 13 skateboards Pintail longboard skateboard deck →