Skateboard grind on a rail SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A skater crouched over the board as it slides along a rail on both trucks, one arm forward and one thrown back. The rail stands on two posts with flat feet, so the piece stands level.
What is in the file
| Size | 99 × 100 mm (3.91 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 731 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 197 curve and line segments |
Measured from the file. PNG: 1,985 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.99 × 1 in (25 × 25 mm) | 0.64 mm | 186 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.98 × 2 in (50 × 51 mm) | 1.3 mm | 371 mm | 25 | Vinyl, card and thin sheet |
| 2.98 × 3 in (76 × 76 mm) | 1.9 mm | 557 mm | 9 | Vinyl, card and thin sheet |
| 3.97 × 4 in (101 × 102 mm) | 2.5 mm | 743 mm | 4 | Vinyl, card and thin sheet |
| 5.95 × 6 in (151 × 152 mm) | 3.8 mm | 1,114 mm | 1 | Any material, including 3 mm wood and acrylic |
| 7.94 × 8 in (202 × 203 mm) | 5.1 mm | 1,485 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.9 × 12 in (302 × 305 mm) | 7.6 mm | 2,228 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skateboard SVG files
-
Skateboard deck from underneath Solid · one piece -
Pintail longboard skateboard deck Solid · one piece -
Skateboard helmet Solid · one piece -
Skateboard wheel with a bearing Solid · one piece -
Layered skateboard in four colours Layered · 6 pieces -
Skateboard from the side Solid · one piece -
Skateboarding ollie Solid · one piece -
Skateboard silhouette of a skater pushing Solid · one piece
← Skateboard ramp with a skater All 13 skateboards Skateboard deck from underneath →