Free rose SVG

Simple rose with twelve petals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Simple rose with twelve petals, as a solid black shape
Simple rose with twelve petals. The preview is the SVG file itself.

The same rose pared down to three rows and twelve petals, with channels over 2 mm wide. Bold enough for small decals, felt and thick card.

What is in the file

Size100 × 98 mm (3.94 × 3.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length1,224 mm at this size
Narrowest part2.4 mm at this size
Nodes475 curve and line segments

Measured from the file. PNG: 2,000 × 1,963 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.61 mm311 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.96 in (51 × 50 mm)1.2 mm622 mm25Vinyl, card and thin sheet
3 × 2.94 in (76 × 75 mm)1.8 mm933 mm9Vinyl, card and thin sheet
4 × 3.92 in (102 × 100 mm)2.4 mm1,244 mm4Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)3.7 mm1,865 mm2Any material, including 3 mm wood and acrylic
8 × 7.85 in (203 × 199 mm)4.9 mm2,487 mm1Any material, including 3 mm wood and acrylic
12 × 11.77 in (305 × 299 mm)7.3 mm3,731 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rose SVG files

← Open rose seen from above All 14 roses Rose flower with three leaves →