Free rose SVG

Rose outline SVG

Rose outline, drawn as a line — Rose outline. The preview is the SVG file itself.

The open rose as a line drawing: every petal edge that shows is drawn as a line 1.7 mm wide, and all the lines join. For colouring, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 98 mm (3.94 × 3.86 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	21: 1 outer edge and 20 cut-outs
Cut length	2,058 mm at this size
Narrowest part	1.7 mm at this size
Nodes	236 curve and line segments

Measured from the file. PNG: 2,000 × 1,963 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.98 in (25 × 25 mm)	0.43 mm	523 mm	100	Too fine for most machines
2 × 1.96 in (51 × 50 mm)	0.86 mm	1,045 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)	1.3 mm	1,568 mm	9	Vinyl, card and thin sheet
4 × 3.92 in (102 × 100 mm)	1.7 mm	2,091 mm	4	Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)	2.6 mm	3,136 mm	2	Vinyl, card and thin sheet
8 × 7.85 in (203 × 199 mm)	3.5 mm	4,182 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.77 in (305 × 299 mm)	5.2 mm	6,273 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rose SVG files

← Rose flower with three leaves All 14 roses Rose with stem and leaves →